DCPZP-2016-00245 - Laserfiche WebLink

Home Browse Search

NATHAN PELESCHAK Page 2 11/23/2015 • IBC 2304.9.5.1 Fasteners and connectors for preservative-treated wood.Fasteners in contact with preservative-treated wood shall be of hot-dipped zinc-coated galvanized steel,stainless steel,silicon bronze or copper. Fasteners other than nails,timber rivets,wood screws and lag screws shall be permitted to be of mechanically deposited zinc-coated steel with coating weights in accordance with ASTM B 695,Class 55 minimum.Connectors that are used in exterior applications and in contact with preservative-treated wood shall have coating types and weights in accordance with the treated wood or connector manufacturer's recommendations. In the absence of manufacturer's recommendations,a minimum of ASTM A 653,type G185 zinc-coated galvanized steel,or equivalent,shall be used. Exception:Plain carbon steel fasteners in SBX/DOT and zinc borate preservative-treated wood in an interior, dry environment shall be permitted. A full size copy of the approved plans,specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors. If plan index sheets were submitted in lieu of additional full plan sets,a copy of this approval letter and index sheet shall be attached to plans that correspond with the copy on file with the Department. If these plans were submitted in an electronic form,the designer is responsible to download,print,and bind the full size set of plans along with our approval letter. A department electronic stamp and signature shall be on the plans which are used at the job site for construction. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. You are responsible for complying with state and federal laws concerning construction near or on wetlands,lakes,and streams. For more information,visit the Department of Natural Resources wetlands identification web page or contact a Department of Natural Resources service center.Nothing in this approval limits the power of municipalities to make or enforce additional or more stringent regulations, providing the regulations do not conflict with this code or any other rule of the department or any law.This plan has not been generally reviewed for compliance with fire code requirements,including those for fire lanes and fire protection water supply,so contact the local fire department for further information. If this construction project will disturb one or more acres of land,a Water Resources Application for Project Permits (WRAPP)(previously known as the Notice of Intent)shall be filed with the Department of Natural Resources prior to any land-disturbing activities. More information regarding the DNR's permitting requirements for runoff management for construction sites can be found at the DNR's website, http://dnr.wi.gov/top is/stormwater/construction/ In granting this approval,the Division of Industry Services reserves the right to require changes or additions,should conditions arise making them necessary for code compliance.As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building,structure,or component. The Division does not take responsibility for the design or construction of the reviewed items. Per s. SPS 361.40(4),projects for buildings of over 50,000 cubic feet total volume shall have supervising professionals who file compliance statements with this agency and the local code officials prior to occupancy of the project. The compliance statement form is available on our website, http://dsps.wi.gov/Documents/Industry%20Services/Forms/Commercial%20Buildings/Combined%20 W orksheets% 20lnstructions%20 2009%20ICC .pdf under forms for commercial buildings. Inquiries concerning this correspondence may be made to me at the telephone number listed below,or at the address on this letterhead. We look forward to working with you to make this code-compliant construction. Sincerely, Fee Required$ 450.00 Dave This Amount Will Be Invoiced. When You Receive That Invoice, David Lintz Please Include a Copy With Your Architect/Bldg Plan Reviewer,Division of Industry Services Payment Submittal. (920)492-7728,7:45 am-4:30 pm M-f WiSMART code: 7648 david.lintz @wi.gov cc: Steve Gothard, State Building Inspector,(608)235-0568 ,Monday 7:45 A.M. -4:30 P.M. Creekview Par Three