Laserfiche WebLink
State of Wisconsin MISCELLANEOUS PROCESSES <br /> Department of Natural Resources AIR POLLUTION CONTROL PERMIT APPLICATION <br /> Section 144.391,Wisconsin Statutes <br /> Form 4500-1P Rev. 12-86 <br /> 1. Facility Name <br /> 2. This data is for process form NP <br /> 4. and has its emissions reduced by control device <br /> 3. which exhausts through stack(s)IS NC <br /> (Use N from appropriate Form 4500-1S.) (Use N from appropriate Form 4500-1C.) <br /> 5. Describe this process 6. Attach a flow diagram of this process identifying major pieces <br /> of equipment,pick-up points for dusts,fumes and vapors, <br /> emissions control devices,exhaust stacks or vents,where raw <br /> materials will enter the process and finished product will exit. <br /> If an existing process is being modified,indicate any new <br /> components which will augment this process. <br /> 7. Normal operating schedule of this process <br /> hrs/day days/week days/yr <br /> 9. Describe the finished product(s)including storage and handling <br /> 8. Provide the approximate amounts of raw materials consumed procedures <br /> by this process,describing storage and handling procedures. <br /> 11. Process Fuel Usage <br /> A. Specify all fuels used by this process and the expected daily <br /> and annual usage of each fuel. <br /> 10. Process Flow Rate(check ✓ appropriate item) <br /> A. ❑ Batch Process <br /> Maximum lbs raw materials/batch (Million BTU <br /> B. Maximum heat input per hour) <br /> Maximum lbs finished product/batch <br /> C. For fuels other than natural gas,propane,or #2 fuel oil, <br /> provide the information required under Items 10, 11,and <br /> Maximum batches/hr 12 on Form 4500-1B,as appropriate. <br /> 12. Describe the size and location of any sources of fugitive <br /> Maximum batches/day emissions which will serve this process such as outdoor storage <br /> piles,unpaved roads,open conveyors,etc. <br /> B. ❑ Continuous Process <br /> Maximum lbs raw materials/hr <br /> Maximum lbs finished product/hr <br /> 13. Complete Form(s)4500.1S for all stacks exhausting this 14. Complete Form(s) 4500.1C for all control devices reducing <br /> process. emissions from this process. <br /> SEE INSTRUCTIONS ON REVERSE SIDE <br />