Laserfiche WebLink
Section 144.391,Wisconsin Statutes <br /> Form 4500-1B Rev.1-87 <br /> 1. Facility Name 5. Manufacturer <br /> 2. This Data is for Fuel Burning Equipment 6. Model Number <br /> /B <br /> 3. Which Exhausts through Stack(s) 7.Normal Operating Schedule of this Equipment <br /> /S <br /> (Use/from appropriate Form 4500-1S) hrs/day days/wk <br /> 4. And has its Emissions Reduced by Control Device(s) <br /> /C days/yr <br /> (Use/from appropriate Form 4500-1C) <br /> 8. List all fuels which this equipment is presently or will be equipped to burn: <br /> A. ❑ Existing Fuel ❑ Proposed Fuel <br /> B. ❑ Existing Fuel ❑ Proposed Fuel <br /> C. ❑ Existing Fuel ❑ Proposed Fuel <br /> 9. Maximum Heat Input (million BTU per hour) <br /> 10. Complete the following table for all fuels listed under item 8. (See footnotes for proper units.) <br /> Fuel A Fuel B Fuel C <br /> Higher Heating <br /> Value iQ <br /> Ash Content, Avg. <br /> Weight Percent <br /> As Fired Max, <br /> Sulfur Content, Avg. <br /> Weight Percent <br /> as Fired Max. <br /> Hourly Avg. <br /> Consumption 2Q <br /> Max <br /> Expected Yearly <br /> Consumption® <br /> Moisture Content of Solid Fuel, <br /> Weight Percent as Fired <br /> Ash Reinjection <br /> Yes/No <br /> Fuel Charging Method QQ <br /> Fuel Charging <br /> Measurement Method sQ <br /> Excess Combustion <br /> Air, Percent <br /> Footnotes for Fuel Data Table <br /> iQ Solid Fuel: BTU/lb Qt Solid:lb/hr Q Solid:tons/yr ® Pulverized coal,spreader stoker, <br /> 3 traveling grate,hand-fired,high <br /> Liquid Fuel: BTU/gal Liquid:gal/hr Liquid: 10 gal/yr pressure air atomizing burner, <br /> Gaseous: BTU/ft3 Gaseous: ft3lhr Gaseous: 106ft3/yr mechanical atomizing burner, <br /> forced draft burner,etc. <br /> © Conveyor scales, liquid <br /> or gas flow meter, feed <br /> screw rotations,etc. <br /> 11. For all solid and waste fuels identified under Item 10,attach 12. For all waste fuels identified under Item 10,attach an analysis <br /> a representative proximate and ultimate analysis. for those substances specified in the instructions. <br /> 13. Complete Form(s)4500-1S for all stacks exhausting this 14. Complete Form(s)4500.1C for all control devices reducing the <br /> equipment. emissions from this equipment. <br /> SEE INSTRUCTIONS ON REVERSE SIDE <br />