|
(21) Except for time and temperature signs [History: 10.76 rep. & recr., Sub. 2 to O.A.
<br /> and electronic signs, no fluttering, 6, 1989-90,pub. 09/21/90. ]
<br /> undulating, rotating, or other moving signs
<br /> shall be permitted. 10.77 LOCATIONAL REGULATIONS.
<br /> . (23) Sign trim is permitted on all signs and (1) Billboards may not be located within 300
<br /> may be installed around the outside of the feet of existing on-premise advertising signs.
<br /> sign copy area. The square foot area of the (2) Off-premise signs may not be installed
<br /> trim shall not be greater than 25% of the within the limits of any curve.
<br /> permitted copy area of the sign. (5) No sign may block or interfere with the
<br /> (24) No sign, temporary or otherwise, shall visibility for ingress or egress of a driveway.
<br /> be affixed to a tree or utility pole, fence or All signs, except auxiliary signs, that are
<br /> fence pole, or be painted on a stone. adjacent to driveway ingress or egress, shall
<br /> [ History: 10.73 rep., recr., Sub. 2 to, O.A. provide a minimum of 6 feet of clearance
<br /> 6, 1989-90,pub. 09/21/90. ] between ground level and the bottom edge of
<br /> the sign.
<br /> 10.74 SPECIFIC REGULATIONS FOR (6) No sign may be located within a
<br /> VARIOUS TYPES OF SIGNS. Signs of permanently protected green space area.
<br /> various types shall be installed according to (7) Home occupation signs shall be
<br /> the regulations set forth below: (13) No sign shall be installed on a roof.
<br /> (6) Billboards shall have a maximum size of [ History: 10.77 rep. & recr., Sub. 2 to O.A.
<br /> 300 square feet and be erected to a height not 6, 1989-90,pub. 09/21/90. ]
<br /> to exceed 35 feet above the centerline of the
<br /> adjacent highway at the location of the sign, 10.78 INTERSECTION
<br /> with a minimum distance of 300 feet between REGULATIONS. (1) A billboard whose
<br /> signs and a total copy area not to exceed 300 bottom edge is less than 8 feet above the
<br /> square feet per sign. centerline elevation of adjacent roads shall
<br /> maintain a minimum distance from road
<br /> 10.75 CALCULATION OF HEIGHT intersections as follows:
<br /> REGULATIONS.
<br /> (2) For billboard signs, the height will be Road Speed Required Distance
<br /> measured from the elevation of the centerline
<br /> of the adjacent road to the top of the sign. 0-35 MPH 100'
<br /> 36-45 MPH 200'
<br /> 10.76 DESIGN REQUIREMENTS. over 45 MPH 300'
<br /> (1) Illumination of signs must be designed so
<br /> that the lighting element is shielded from (2) A billboard whose bottom edge is 8 feet
<br /> view from any adjacent residence and from or higher above the centerline elevation of
<br /> vehicular traffic. Neon and fiber-optic adjacent roads may be located up to the
<br /> lighting and electronic signs are exempt from vision triangle line.
<br /> this regulation. (9) No sign shall be erected or maintained in
<br /> (2) No sign shall use any word, phrase, an intersection vision clearance triangle.
<br /> symbol, shape, form, or character in such (10) This section shall not be construed to
<br /> manner as to interfere with moving traffic, supersede, abridge or amend state and federal
<br /> including signs which incorporate typical regulations which are more restrictive.
<br /> street-type or traffic control-type sign designs [ History: 10.78 rep. & recr., Sub. 2 to O.A.
<br /> and colors. No sign may be installed at any 6, 1989-90, pub. 09/21/90; (5) and (6) am.,
<br /> location where by reason of its position, O.A. 6, 1994-95,pub. 09/02/94. ]
<br /> wording, illumination, size, shape, or color it
<br /> may obstruct, impair, obscure, interfere with 10.79 SIGN MAINTENANCE
<br /> the view of, or be confused with, any official REGULATIONS. (1) All signs within the
<br /> traffic control sign, signal or device. jurisdiction of this ordinance shall remain in
<br /> a state of proper maintenance. Proper
<br />
|