DCPZP-2016-00499 - Laserfiche WebLink

Home Browse Search

X JERRY BOURQUIN Pagc2 7/12/2016 5 • SPS 361.30(3)-Submit,prior to installation,one(1)set of properly signed and sealed metal building plans,. calculations substantiating the design,and a completed SB-1 18 application form including this transaction number and signed by the building designer to Industry Services,P.O.Box 7162,Madison WI 53707-7162. } Note as per SPS 302.31(1)(d)4.the fee for a structural component submitted after project completion shall be an additional$250. • IECC 502 A.6-Provide loading dock weatherseals for loading and cargo doors. Loading dock weatherseals are Y __ not required to be installed where the enclosed building space immediately adjacent to a dock is unconditioned. Y Sc4 ..t Y. �yfw I v • Designer has provided an update to sheet A2.0 reflecting the callout for loading dock seals. •_. IECC Table 402.1.1/IECC Table 502.2(1) Insulative continuity must be maintained in the design of slab edge insulation systems. Continuity must be maintained from the wall insulation through the intersection of the slab, wall and footing to the body of the slab edge. • SPS 361.36(1)(a)&(b)-The building shell shall be closed within two years of the initial approval date of this project. Also,this approval will expire three years after the date of initial approval of this project if the work covered by this approval is not completed and the building ready for occupancy within those three years. A full size copy of the approved plans,specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors.If plan index sheets were submitted in lieu of additional full plan sets,a copy of this approval letter and index sheet shall be attached to plans that correspond with the copy on file with the Department. If these plans were submitted in an electronic form, the designer is responsible to download,print,and bind the full size set of plans along with our approval letter. A. department electronic stamp and signature shall be on the plans which are used at the job site for construction. All permits required by the state or the local municipality shall be obtained prior to commencement of construction/installation/operation. You are responsible for complying with state and federal laws concerning construction near or on wetlands,lakes,and streams. For more information,visit the Department of Natural Resources wetlands identification web page or contact a Department of Natural Resources service center.Nothing in this approval limits the power of municipalities to make or enforce additional or more stringent regulations, providing the regulations do not conflict with this code or any other rule of the department or any law.This plan has not been generally reviewed for compliance with fire code requirements,including those for fire lanes and fire protection water supply,so contact the local fire department for further information. If this construction project will disturb one or more acres of land,a Water Resources Application for Project Permits (WRAPP)(previously known as the Notice of Intent)shall be filed with the Department of Natural Resources prior to any land-disturbing activities. More information regarding the DNR's permitting requirements for runoff management for construction sites can be found at the DNR's website, http://dnr.wi.gov/topic/stormwater/construction/ In granting this approval,the Division of Industry Services reserves the right to require changes or additions,should conditions arise making them necessary for code compliance.As per state stats 101.12(2),nothing in this review shall relieve the designer of the responsibility for designing a safe building,structure,or component. The Division does not take responsibility for the design or construction of the reviewed items. Per s.SPS 361.40(4),projects for buildings of over 50,000 cubic feet total volume shall have supervising professionals who file compliance statements with this agency and the local code officials prior to occupancy of the project. The compliance statement form is available on our website, http://dsps.wi.gov/Documents/Industry%o20Services/Forms/Commercial%20Buildings/Combined%20 Worksheets%2 Olnstructions%o20 2009%2OICC_.pdf under forms for commercial buildings. Inquiries concerning this correspondence may be made to me at the telephone number listed below,or at the address on this letterhead. We look forward to working with you to make this code-compliant construction.