DCPZP-2017-00012 - Laserfiche WebLink

Home Browse Search

10.75(2)—10.78(3) (2) For billboard signs, the height will be (4)■eh tbny measured from the elevation of the centerline of 300•feet of existing-' the adjacent road to the top of the sign. (5) No sign may block or interfere with the (3 For directory signs, the height will be visibility for ingress or egress of a driveway. All measur rom'the elevJaf.1herPnterline of signs, except auxiliary signs, that are adjacent to the si n. driveway ingress or egress, shall provide a (4) For electronic signs, the heig t o e sign minimum of 6 feet of clearance between ground shall be determined by the manner of installation level and the bottom edge of the sign. of the sign, i. e., according to whether the sign is (6) No sign may be located within a of the ground, wall, projecting or pylon type. permanently protected green space area. (5) For ground mounted signs, except (7) Home occupation signs shall be mounted billboards, directory or pylon signs, the height on the residence in which the occupation is shall be measured from ground level beneath the located. sign to the top edge of the sign. (8) Limited family business signs shall be (6) For a projecting sign, the height shall be mounted on the building in which the business is measured from ground level to the top of the located. sign. The bottom edge of such sign shall be (9) Each primary building housing a separate located a minimum of eight feet from ground unaffiliated business on a parcel is allowed to level directly under the sign. have the total related signs as permitted by this (7) For a pylon sign, the height will be ordinance, e. g., each building in a condominium measured from the elevation of the centerline of plat and each leased or rented building in a the adjacent road to the top of the sign. complex shall be entitled to the total number of (8) For a wall sign, the height shall be signs. Businesses located in one building must measured from the base of the building below share the total signs allocated to the building. the sign to the top of the sign face. The top of (10) Projecting signs may not be located the sign may not be higher than the building on directly over a public or private street, drive or which it is mounted. parking area. [History: 10.75 rep. & recr., Sub. 2 to OA 6, 1989-90, pub. (11) Ground and pylon signs may not be 09/21/90.] located less than 5 feet from a rear lot line. 10.76 DESIGN REQUIREMENTS. (12) No sign shall be located within a road right- (1) Illumination of signs must be designed so that (1 way. (13) No sign shall be installed on a roof. the lighting element is shielded from view from [History: 10.77 rep. & recr., Sub. 2 to OA 6, 1989-90, pub. any adjacent residence and from vehicular 09/21/90;(9)am.,OA 35,2000-01,pub.10/25/01.] traffic. Neon and fiber-optic lighting and electronic signs are exempt from this regulation. 10.78 INTERSECTION REGULATIONS. (1) A (2) No sign shall use any word, phrase, billboard whose bottom edge is less than 8 feet symbol, shape, form or character in such manner above the centerline elevation of adjacent roads as to interfere with moving traffic, including signs shall maintain a minimum distance from road which incorporate typical street-type or traffic intersections as follows: control-type sign designs and colors. No sign may be installed at any location where by reason Road Speed Required Distance of its position, wording, illumination, size, shape or color it may obstruct, impair, obscure, interfere 0-35 MPH 100' with the view of, or be confused with, any official 36-45 MPH 200' traffic control sign, signal or device. over 45 MPH 300' [History: 10.76 rep. &recr., Sub.2 to OA 6, 1989-90,pub. 09/21/90.] (2) A billboard whose bottom edge is 8 feet or 10.77 LOCATIONAL REGULATIONS. (1) higher above the centerline elevation of adjacent Billboards may not be located within 300 feet of roads may be located up to the vision triangle line. existing on-premise advertising signs. (2) Off-premise (3) A directory sign whose bottom edge is less (2) remi se signs may not be installed curve.)hin the of any than 8 feet above the centerline of adjacent within limits Crop signs shall curve. located within 50' of the roads shall maintain a minimum distance from road intersections as follows: crop identified. Page 10-77 rev. 013116