DCPZP-2017-00444 - Laserfiche WebLink

Home Browse Search

Page 2 of 3 top of the sign face. O Section 10.74(23)of the DCCO states that wall signs shall have a maximum size of • 100 square feet where the speed limit on the adjacent highway is 35 miles per hour or less, • 200 square feet where the maximum permissible speed on the adjacent highway is between 36 and 45 miles per hour, inclusive, and • 300 square feet where the speed limit on the adjacent highway is more than 45 miles per hour. This property will be viewed by the beltline. Can the county look at this as a+45mph rule? If so, our total wall signage square footage is 187.69, and would be acceptable by code. Such a sign shall be erected to a height not to exceed • 20 feet where the speed limit on the adjacent highway is 35 miles per hour or less, All signs OK. All wall signage is less than 20'tall from grade to top of sign. • 35 feet where the speed limit on the adjacent highway is between 36 and 45 miles per hour, inclusive, and • 50 feet where the speed limit on the adjacent highway is more than 45 miles per hour, except that for buildings six stories or more in height, a wall sign may also be located within 20 feet of the top of the building facade. There shall be no more than two such signs per building, • except that a building on a zoning lot with two road frontages is allowed a maximum of three wall signs and Can we have 3 standard wall signs and an accessory sign?"Certified Service" marks the service entrance. • except that a building on a zoning lot with more than two road frontages is allowed a maximum of four wall signs. The maximum size and height of signs on zoning lots with two or more road frontages shall be determined by reference to the nearest adjacent road which is not within the right-of-way of another road. Notwithstanding that more than two wall signs are allowed on a building, in no event shall there be more than two wall signs on any one side of the building. Wall signs shall be located only on the building containing the business advertised on the sign. Section 10.73(6)of the DCCO states that the total sign copy area of all on-premise signs related to a business shall not exceed the maximum permitted sign copy area. Sign copy area shall be measured in the following manner: • The copy area of signs which have a face, border or trim shall consist of the entire surface area of the sign on which copy could be placed. Copy area of a sign whose message is applied to a background which provides no face, border or trim shall be • the area of the smallest rectangle which can encompass all words, letters, figures, emblems and other elements of the sign message. Please submit the distance between the bottom of the"BUICK" signature sign and the to of the"GMC"signature sign for the calculation of the area of the smallest rectangle which can encompass all words, letters, figures, emblems and other elements of the sign message. Please submit the distance for both the sign on the wall of the building and the signs on the walls of the clock tower. Also,you submitted northerly and easterly elevation views of the clock tower, are you proposing signs for the southerly and westerly elevations of the clock tower? Russell L. Bartlett, bartlettacountyofdane.com, Zoning Inspector, County of Dane 11/3/2011