Laserfiche WebLink
• <br /> 3 . Permits required by any other governmental agencies <br /> must be met . <br /> SPECIFICATIONS FOR THE CONSTRUCTION OF DRIVEWAYS <br /> 1 . Each driveway shall have a culvert at the ditch <br /> line where the driveway meets the public road, <br /> unless waived by the Town Board. The culvert shall <br /> be at least eighteen (18) inches in diameter and <br /> the length shall be at least twenty-eight (28) <br /> feet long. <br /> 2 . The driveway must have at least a depth of six (6) <br /> inches of roadbed with at least three (3) inches <br /> of three (3) inch crushed rock. <br /> 3 . An area of eighteen (18) feet in width and <br /> eighteen (18) feet in height shall be cleared <br /> along the driveway in order to permit the safe <br /> passage of emergency vehicles . A gravel top <br /> surface of twelve (12) feet in width is required. <br /> 4 . The driveway must have a turning radius at the <br /> place where it intersects with a public road of at <br /> least twenty (20) feet and an unobstructed view at <br /> that place . <br /> 5. Curves in the driveway shall have an inside radius <br /> of not less than thirty-six (36) feet . <br /> 6 . The driveway must be clearly marked with the fire <br /> number so emergency vehicles can find the home. <br /> 7 . Each driveway slope must not exceed a grade of ten <br /> (10) percent . <br /> 8 . All driveways must meet or adjoin to an existing <br /> public town, county, or state road. <br /> This ordinance shall take effect immediately upon passage and <br /> posting or publication as provided by law. <br />