DCPZP-2021-00319 - Laserfiche WebLink

Home Browse Search

DIVISION OF INDUSTRY SERVICES PO BOX 7302 y3 Toy MADISON WI 53705 8� Contact Through Relay http://dsps.wi.gov/programs/Default.aspx www.wisconsin.gov 4 Tony Evers,Governor °�ssioNP� Dawn B.Crim,Secretary October 23, 2020 CUST ID No. 1445686 ATTN:•Buildings&Structures Building Inspector ADAM HERTEL BUILDING INSPECTION AMERICAN ARCHITECTURAL GROUP INC TOWN OF BURKE 3350 S RIVER RD 5365 REINER ROAD WEST BEND WI 53095 BURKE WI 53718 CONDITIONAL APPROVAL (Please forward a copy of this letter to the fire department conducting inspections of this project.) PLAN APPROVAL EXPIRES: 10/23/2022 SITE: Identification Numbers Burke Truck&Equipment Transaction ID No.3319134 5337 Reiner Rd Site ID No. 160136 Town of Burke Please refer to both identification numbers, Dane County above,in all correspondence with the agency. FOR: Facility:627790 BURKE TRUCK&EQUIPMENT- COLD STORAGE BLDG 5337 REINER RD BURKE Object Type:Building ICC Regulated Object ID No.: 1853960 Code Applies Date: 08/14/20 Alteration Level: 2; Major Occupancy: Storage; Type IIB Metal Frame Unprotected class of construction; Addition-Alteration plan; 4,073 project sq ft; Unsprinklered; Occupancy: S-1 Storage Moderate-Hazard; Allowable area determined by:Fire Barrier SITE REQUIREMENTS • Contact both the State Inspector and the local municipality PRIOR to the start of construction. • A full size copy of the approved plans,specifications and this letter shall be on-site during construction and open to inspection by authorized representatives of the Department,which may include local inspectors. If plan index sheets were submitted in lieu of additional full plan sets,a copy of this approval letter and index sheet shall be attached to plans that correspond with the copy on file with the Department. If these plans were submitted in an electronic form,the designer is responsible to download,print,and bind the full size set of plans along with our approval letter. A department electronic stamp and signature shall be on the plans which are used at the job site for construction. The following conditions shall be met during construction or installation and prior to occupancy or use: SUBMIT -The following systems require submittal for review and approval prior to construction. • SPS 361.30(3)-This approval does not include heating,ventilating or air conditioning. The owner should be reminded that HVAC plans,calculations,and appropriate fees are required to be submitted for review and approval prior to installation in the field. The HVAC plans shall be directed to the office where building plans were originally submitted and conditionally approved(as appropriate). Building Designer should coordinate with HVAC design to avoid problems with clearance to combustibles, dampers etc. The submitted HVAC plans and calculations shall match the approved building plans. Building Designer is requested to provide a complete set of plans,Energy Calculations and the Building plan review Transaction I.D. number to the HVAC Designer to help coordinate review. Note as per SPS 302.10 installation of IIVAC without approved plans could result in double plan review fees. • SPS 361.30(3)-Submit,prior to installation,one(1)set of properly signed and sealed metal building plans, calculations substantiating the design,and a completed SB-118 application form including this transaction number and signed by the building designer to the office of original review. Note as per SPS 302.31(1)(d)4.the fee for a structural component submitted after project completion shall be an additional$250.