Laserfiche WebLink
:10.77(5)- 10.79(1) <br /> (5) No sign may block or interfere with the . Road Speed Required Distance <br /> visibility for ingress or egress of a driveway. All <br /> signs, except auxiliary signs, that are adjacent to 0-35 MPH 100' <br /> driveway ingress or egress, shall provide a 36-45 MPH 200' <br /> minimum of 6 feet of clearance between ground over 45 MPH 300' <br /> level and the bottom edge of the sign. <br /> (6) No sign may be located within a permanently (4) A directory sign whose bottom edge is 8 feet or <br /> • protected green space area. higher above the centerline of adjacent roads may <br /> (7) Home occupation signs shall be mounted on be located up to the vision triangle line. <br /> the residence in which the occupation is located. (5) An on-premise ground sign whose top is more <br /> (8) Limited family business signs shall be mounted than 30 inches above the centerline of the adjacent <br /> on the building in which the business is located. road or whose bottom edge is less than 6 feet above <br /> (9) On premise advertising signs for commercial the centerline of the adjacent road, shall maintain a <br /> businesses may not be located farther than 200 feet minimum distance from road intersections as <br /> from the primary building of the business shown: <br /> advertised. Each primary building housing a <br /> separate unaffiliated business on a parcel is allowed Road Speed Required Distance <br /> to have the total related signs as permitted by this <br /> ordinance, e. g., each building in a condominium 0-35 MPH 100' <br /> plat and each leased or rented building in a 36-45 MPH 200' <br /> complex shall be entitled to the total number of . over 45 MPH 300' <br /> signs. Businesses located in one building must <br /> share the total signs allocated to the building. (6) An on-premise ground sign whose top is less <br /> (10) Projecting signs may not be located directly than 30 inches above the centerline of the adjacent <br /> over a public or private street,drive or parking area. road or whose bottom edge is 6 feet or more above <br /> (11) Ground and pylon signs may not be located the centerline of the adjacent road may be installed <br /> less than 5 feet from a rear lot line. up to the vision clearance triangle line. <br /> (12) No sign shall be located within a road (7) An on-premise pylon sign whose bottom edge is <br /> right-of-way. less than 8 feet above the centerline of the adjacent <br /> (13) No sign shall be installed on a roof. road shall maintain a minimum distance from road <br /> [History: 10.77 rep. & recr., Sub. 2 to OA 6, 1989-90, pub. intersections as shown: <br /> 09/21/90.] <br /> 10.78 INTERSECTION REGULATIONS. (1) A Road Speed Required Distance <br /> billboard whose bottom edge is less than 8 feet 0-35 MPH 100' <br /> above the centerline elevation of adjacent roads 36-45 MPH 200' <br /> shall maintain a minimum distance from road <br /> intersections as follows: over 45 MPH 300' <br /> Road Speed Required Distance (8) An on-premise pylon sign whose bottom edge is <br /> 8 feet or more above the centerline of adjacent <br /> 0-35 MPH 100' roads may be located up to the vision triangle line. <br /> 36-45 MPH 200' (9) No sign shall be erected or maintained in an <br /> over 45 MPH 300' intersection vision clearance triangle. <br /> (10) This section shall not be construed to <br /> (2) A billboard whose bottom edge is 8 feet or supersede, abridge or amend state and federal <br /> higher above the centerline elevation of adjacent regulations which are more restrictive. <br /> roads may be located up to the vision triangle line. [History: (5)and(6)am.,OA recr.,1 94-95,pub.09/02/94.]1989-90, pub. <br /> (3) A directory sign whose bottom edge is less <br /> • than 8 feet above the centerline of adjacent roads 10.79 SIGN MAINTENANCE REGULATIONS. (1) <br /> shall maintain a minimum distance from road All signs within the jurisdiction of this ordinance . <br /> intersections as follows: shall remain in a state of proper maintenance. <br /> Proper maintenance shall be the absence of loose <br /> materials including peeling paint, paper or other <br /> Page 10-54 <br /> rev..103198 <br />