DCPZP-2016-00721 - Laserfiche WebLink

Home Browse Search

Page 1 of 2 POWTS OWNER'S MANUAL& MANAGEMENT PLAN FILE INFORMATION SYSTEM SPECIFICATIONS • Owner: ERIK&CATHERINE RANHEIM Tank Manufacturer: CREST I XI Septic I I Dose I I Holding Volume 1600 gal Permit: POWTS# Tank Manufacturer: N/A I I Septic I I Dose I Holding Volume gal DESIGN PARAMETERS Vertical Distance Tank Bottom(s)to Service Pad: <15'ft Number of Bedrooms: 4 Horizontal Distance Tank(s)to Service Pad: <150' ft. Number of.Public Facility Units: N/A Specific servicing mechanics must be provided if vertical is>15 ft. Estimated (average) Flow: 400 gal/day or if horizontal is>150 ft.Specific instructions on plan addendum. Design (peak) Flow=estimated x 1.5: 600 gal/day In Situ Soil Application Rate: 0.6 gal/day/ft2 Effluent Filter Manufacturer and Model: Standard Domestic Influent/Effluent Monthly average BEST GF10 OR EQUIVALENT Fats,Oil&Grease(FOG) 5 30 mg/L Pump Manufacturer and Model: N/A Biochemical Oxygen Demand(BOD5) <_220 mg/L Total Suspended Solids(TSS) 5 150 mg/L Pretreatment Unit High Strength Influent/Effluent Monthly average Manufacturer: Fats,Oil&Grease(FOG) >30 mg/L I I Mechanical Aeration I I Peat Filter Biochemical Oxygen Demand(BOOS) >220 mg/L _ N/A n Disinfection I Wetland N/A Total Suspended Solids(TSS) >150 mg/L I I Sand/Gravel Filter n Other: Pretreated Effluent Monthly average Soil Absorption System Biochemical Oxygen Demand(BOD5)5 30 mg/L I I In-ground(gravity) I I In-ground(pressure) Total Suspended Solids(TSS)5 30 mg/L N/A © At-grade n Mound Fecal Coliform(geometric mean) 5104 cfu/100m1 I I Drip-line n Other: Maximum Effluent Particle Size: 1/8 in.dia. Other: N/A Other: N/A MAINTENANCE SCHEDULE Service Event Service Pump out contents of tank(s) When combined sludge and scum equals one-third(1/3) of tank volume. When the high water alarm is activated. Inspect condition of tank(s) At least once every 3 years Inspect dispersal cell(s) At least once every 3 years Clean effluent filter Every year or as needed within a 3 year interval Inspect pump, pump controls &alarm N/A Flush laterals and pressure test N/A Other: N/A Other: N/A MAINTENANCE INSTRUCTIONS Inspection of tanks and dispersal cell(s)shall be made by an individial carrying one of the following licenses or certifications:Master Plumber,Master Plumber Restricted Sewer,POWTS Inspector,POWTS Maintainer,Septage Servicing Operator(pumper).Tank inspections must include a visual inspection of the tank(s)to identify any missing or broken hardware,identify any cracks or leaks,measure the volume of combined sludge and scum and a check for any backup or ponding of effluent on the ground surface.The dispersal cell(s)shall be visually inspected to check the effluent levels in the observation pipes and to check for any ponding of effluent in the ground surface.The ponding of effluent on the ground surface may indicate a failing condition and require the immediate notification of the local regulatory authority. When the combined accumulation of sludge and scum in any treatment tank equals one-third(1/3)or more of the tank volume,the entire contents of the tank shall be removed by a Septage Servicing Operator and disposed of in accordance with chapter NR 113,Wisconsin Administrative Code. All other services,including but not limited to the servicing of effluent filters,mechanical or pressurized components,pretreatment units,and any servicing at intervals of 5 12 months,shall be performed by a certified POWTS Maintainer. A service report shall be provided to the local regulatory authority within 30 days of completion of any service event.