1973-1975 Zoning Ordinance - Laserfiche WebLink

Home Browse Search

- 4 - . (f) Solid waste disposal operations, sanitary land fill sites. -- (g) Auto laundries, car washes. (h) Taverns. (i) Residence for a watchman or caretaker. Repeal subsection 10.14 (3) (a) and recreate to read as follows: (a) The maximum height for all buildings shall be 50 feet. Thanks, storage bins, silos and towers shall not be subject to this limitation. Repeal subsection 10.14 (4) . Renumber subsection 10.14 (5) to (4) . Repeal subsections 10.14 (6) and (7) . • Create a new subsection 10.14 (5) to read as follows: (5) SIDE YARD REQUIREMENTS (a) For business or commercial buildings no side yards shall be required for interior lots; provided, however, that if a business or commercial build- ing is built, on a lot adjacent to a lot or parcel zoned residential, then -_ such business or commercial building shall provide a side yard equal to that which is required for the building on the adjacent lot. Create anew subsection 10.14 (6) to read as follows: (6) REAR YARD REQUIREMENTS (a) For business and commercial buildings, the minimum depth of any rear yard shall be 10 feet. Renumber subsection 10.14 (8) to (7) . Create a new subsection 10.14 (8) to read as follows: • (8) SCREENING PROVISIONS (a) On lots adjacent to or abutting land in a residence district, the screening provisions of Section 10.16 (8) shall be complied with prior to the issuance of :a Certificate of Compliance. Repeal subsections 10.15 (1) (a) and (b) and recreate to read as follows: (a) Major repairs to motor vehicles. • (b) Sales of new and used motor vehicles. (c) Sales of new and used mobile homes. (d) Sales of new and used contractor's machinery and equipment. (e) Repairs and service of contractor's machinery and equipment. T (f) Rental and leasing of motor vehicles, contractor's machinery and equipment. (g) Bulk fuel storage, sales and outside storage of lumber and building material. (h) Truck and bus terminals. ' (i) Auxiliary or supplemental electric generating stations. (j) Fertilizer mixing or blending plants. (k) Slaughter houses, meat processing plants. (1) . Bottling plants. (m) Utility services. • (n) Foundries and forging plants. (o) Structural steel fabrication plants. (p) Metal, pressing, stamping or spinning plants. (q) Manufacturing and assembly plants for automobiles, farm equipment and con- struction machinery. (r) Mobile home, manufactured housing plants. Repeal subsections 10.15 (2) (a) thru (f) and recreate to read as follows: (a) Drive-in establishments in addition to the standards established in 10.25 (4) (g)